Installation / Maintenance

Do-It-Yourself Installation

The Clearview® system is designed for the Do-It-Yourself homeowner! All you need are a few basic tools (and a friend, or two), and you will be able to do the installation yourself. Your custom cable railing kit will be delivered to you with detailed drawings and easy-to-understand instructions. Of course, we are here to assist you in any way we can. Call us toll-free at (888) 842-9492.

Once your Clearview® shipment has arrived at your door and you have gathered the few tools and supplies that are required. You can rest assured that there will be no trips to the hardware store. All of the pieces are included, from the cut-to-length top rail segments and predrilled posts to the tensioning nuts and cable fittings. The stainless steel cable is available in three precut options.

In addition, you will receive instructions, and a packing list. Watch our installation video to see just how easy installation is.

Maintenance

It is recommended that you thoroughly clean your railing right after installation and then periodically, or as necessary. Most chloride-free cleaners (glass cleaners are usually a good choice) or a simple solution of mild soap and water will work. There are also many widely-available products designed specifically for use on stainless steel. For an added level of protection and shine, you can apply a coat of good car wax.

Certain environments (marine, polluted, exposure to corrosive elements, etc.) can be harsh on stainless steel. In these circumstances, being more diligent in your cleaning regimen will help you keep your railing looking beautiful.

A maintenance guide and a non-abrasive pad will be included with all railing orders. If you should notice any discoloration, use the non-abrasive pad to clean the affected area. Be sure to take note of the direction of the grain of the steel.

Additionally, AGS will provide a passivating kit with all exterior railing systems. Treat the area with the passivating fluid per the instructions on the bottle to restore the stainless steel's natural corrosion-resistant layer. The passivating fluid can also be used to remove more stubborn spots.

IMPORTANT!! NEVER use a metallic or coarse abrasives such as steel wool or sandpaper on your railing. This might actually facilitate corrosion or rust.

Any slack in the cables can be taken up in the same manner in which they were originally tensioned (see instructions). Remember, there is no need to tighten the cables more than what is necessary to eliminate any sag